Page 419 - marine
P. 419

On Reverse
Mikuni Parts & Tools
SEE TOOLS SECTION FOR MORE CARB TOOLS
DUAL BN38 THROTTLE SHAFT UPDATE KIT
• MK-BN 006 For Super BN duals sold by Mikuni american only. It does not affect the original Super BN38 duals from Sea-Doo. PROBLEM: In some applications the sides of the throttle plates have become damaged because of side to side thrusting of the throttle shafts at full throttle opening. The thrusting effect is caused by engine vibrations. The damage to the throttle plates shows as a distortion of the outer edges, adjacent to the throttle shafts. In the extreme case this distortion is not dangerous, but, it will allow enough air leakage around the throttle plates to cause the idle to no longer be controlla- ble with the idle screw. Instructions included
COUPLING KITS
• MK-BN/001 $B 34.50 Allows two carbs to be connected for dual carb setups. Instructions included
THROTTLE ROD FOR SUPER BNI
Part No. BN38/573 $B 24.91
MIKUNI TOOL KIT
• This handy little kit contains all the tools necessary to make jetting changes, perform normal maintenance as well as disassemble and rebuild any Mikuni carburetor
• Included is a multi-purpose wrench with ruler markings, a screw driver with assorted blades and sockets as well as a socket screw driver for main jets. Part No. MK-404 $B 37.88
MIKUNI PLUNGER TYPE PRIMER KIT
Kit complete with primer, filtered “T” fitting and primer hose
$B 41.30 $B 45.44 $B 47.51
$B 2.66 $B 1.62
THROTTLE SHAFT REBUILD KITS
• MK-BN/038tv for SBN 38mm • MK-BN/044tv for SBN 44mm • MK-BN/046tv for SBN 46mm Kit includes butter y valve, shaft, screws, instructions.
SUPER BN OWNERS MANUAL
• MK-BN/004 $B 4.97
CARB HOLDER RUBBER PLUGS
Part No. 07-4972 $B 4.35 ea. Universal rubber plug has many uses
Watercraft Parts & Accessories
FUEL
Single
Dual
Triple
INDIVIDUAL COMPONENTS Brass Primer Inlet Part No. 006-536 Brass Carburetor Plug Part No. 006-537
POP OFF PUMPS
Part No. 006-500 Part No. 006-501 Part No. 006-504
• 30 Ib gauge gives accurate pop off pressure readings • High pressure pump is durable and easy to use
• A must for tuning your BN carb
Part No. MK-BN PMP $B 89.70
60 Ib gauge and pump
Part No. MK-BN PMP 60 $B 89.70
100 Ib gauge and pump allow for readings on many stock carbs with small needle valves and strong springs
Part No. MK-BN PMP 100 $B 89.70
PRICE LIST ON PAGE 421
2017 MARINE • PWC 419


































































































   417   418   419   420   421